|
Post by Evolution on Jan 25, 2012 19:38:02 GMT -6
I just wanted to take a second and remind everyone that we will be racing Mills-Craft in Feb., those that like the heavy wheel classes most likely would like Mills-Craft. We are racing it 4 times this season and all that enter the class will be in the finals. Make sure to get your kit early and enjoy the build.
|
|
|
Post by oldblueracer on Jan 26, 2012 16:11:18 GMT -6
I can enter the car I used last year / with a tune up on the axles and wheels right
|
|
|
Post by Evolution on Jan 26, 2012 16:17:59 GMT -6
Blue,
I do not recall the one you entered, if you can provide pictures and info I will be able to help you.
Guys please check the rules.
|
|
|
Post by CycRunner on Jan 26, 2012 16:18:33 GMT -6
I'm counting on that too as I need to get more speed - big time! Was running MV precision wheels and am switching to good old BSA USA made. Hope this helps because I really need it!
|
|
|
Post by oldblueracer on Jan 26, 2012 19:09:56 GMT -6
|
|
|
Post by steepslope on Jan 26, 2012 20:06:00 GMT -6
Yes, it appears you can enter the Mills-Craft you made last year.
You may enter your Spec/Tuners in any division you want (except for HR66), depending on the wheels and axles required for those divisions.
steepslope
|
|
|
Post by Evolution on Jan 26, 2012 20:08:30 GMT -6
Blue,
That Mills-Craft will be fine. The Spec Tuner cars could run in Stock as is, if you change the wheels out then they could run in limited.
|
|
|
Post by CycRunner on Jan 26, 2012 22:52:27 GMT -6
Need clarification on rules: "No bearings , bushings, or inserts". I understand that. Can washers on the axels be used?
|
|
|
Post by Evolution on Jan 26, 2012 23:42:47 GMT -6
For Mills-Craft, yes washers can be used.
|
|
|
Post by murph on Jan 27, 2012 9:20:37 GMT -6
SLT and TNR will be entering cars in Mills Craft Division.
|
|
|
Post by Evolution on Jan 27, 2012 10:06:12 GMT -6
I will also have at least one car fielded. I am going to try and get another done before Feb.
|
|
|
Post by oldblueracer on Feb 10, 2012 23:39:52 GMT -6
I was looking at the rules for the Mills- Craft div I am reading the lubrication rule right that you can use oil this year and not just graphite like last year and I can use any kind of axle not just the mills-craft that come with the kit on a side issue I can drill out some wood from under the car to add some real weight and not just wood weight
|
|
|
Post by Evolution on Feb 11, 2012 0:10:44 GMT -6
You can completely hollow out the car if you wish. You can not hollow out the car and place it on a frame. You can run oil. The wheel and axle rules are the same as they are in limited.
|
|