|
Post by Bubba on Feb 21, 2008 15:38:20 GMT -6
|
|
|
Post by docb on Feb 21, 2008 16:32:33 GMT -6
Very Nice Bubba!!!
|
|
|
Post by Lucky 13 on Feb 21, 2008 20:09:31 GMT -6
Rick, Very nice build !! What are the dimension of the finished product ?? How did it survive it's first trip to Minnesota ?
Lucky 13
|
|
|
Post by Bubba on Feb 22, 2008 11:14:52 GMT -6
Rick, Very nice build !! What are the dimension of the finished product ?? How did it survive it's first trip to Minnesota ? Lucky 13It survived it's first trip just fine. Built another one for my older son's Novice entry for March. Don't have the exact dimensions (I'll have to get them for you), but I believe it's about 4" wide, 11" long, 2" tall. Bubba
|
|
|
Post by psycaz on Feb 22, 2008 12:57:49 GMT -6
Bubba, Does the top tighten down to have a firm griop n the car body?
TIA
|
|
|
Post by Bubba on Feb 22, 2008 13:30:30 GMT -6
Bubba, Does the top tighten down to have a firm grip on the car body? TIA With the Pro-Mod version in the pics, when the top is pressed down all the way there is little if any "wiggle room", the car is pretty firmly held from all sides (top/bottom, front/back, and sides). There is a little top/bottom gap in the one we just built for the older boy's Novice car, in part due to the uneven top/bottom shape of the car itself. But with the snug fit from the sides and front/back, I'm not sure it's necessary to get rid of that one little bit of possible movement. The main thing we were trying to accomplish was to protect the wheels and axles from damage. So far, so good. Bubba
|
|
|
Post by psycaz on Feb 23, 2008 14:32:08 GMT -6
THanks Bubba. I'll look for the dimensions when/if you get a chance to post them. I need to build something so I can start sending in a car or two.
|
|
|
Post by Bubba on Feb 23, 2008 20:35:25 GMT -6
...I'll look for the dimensions when/if you get a chance to post them. I pulled out the tape measure: Height 2", Width 4", Length 10-3/4" (length fits nicely in the box I ship the cars in). Bubba
|
|