joshm
Graphite
pinewoodracer365
Posts: 20
|
Post by joshm on Mar 4, 2009 18:30:49 GMT -6
Hey everyone, I'm Josh McCue and I am new to PWD racing. I would like to know what a good size is for an icon.
Thanks, Josh M.
|
|
|
Post by beakerboysracing on Mar 4, 2009 21:34:17 GMT -6
100x100 works well for Avatars.
Scott
Beakerboys
|
|
joshm
Graphite
pinewoodracer365
Posts: 20
|
Post by joshm on Mar 4, 2009 21:44:50 GMT -6
How do I make it work? I put the URL to my picture and chose the size but it didn't work.
|
|
|
Post by beakerboysracing on Mar 4, 2009 22:04:43 GMT -6
if using photobucket, be sure to use the direct link address. It will look like this (http://i285.photobucket.com/albums/ll47/beakerboysracing/newavatar.png)
Notice the i in the front of the address for image.
Scott
Beakerboys
|
|
|
Post by Mr. Slick on Mar 5, 2009 7:32:45 GMT -6
|
|
joshm
Graphite
pinewoodracer365
Posts: 20
|
Post by joshm on Mar 5, 2009 20:31:05 GMT -6
wow those pics are so gnarly. i was planning on using a different pic for my icon though. but i will use one of those pics as my sig, thanks a lot! the thing is is that's not my car, i found it on the website for the down and derby movie because i really want to make a car just like it, i've never built one before.
|
|
|
Post by Mr. Slick on Mar 6, 2009 10:07:54 GMT -6
That style of car is what we used for the F.R.E.D. division - aka Old School. There should be lots of photos someplace around here. They are included with the other cars from the builders in the 2008 photos. I could look around and see if I have any left or you can get them from the manufacturer BetaCrafts.
|
|
joshm
Graphite
pinewoodracer365
Posts: 20
|
Post by joshm on Mar 6, 2009 23:13:58 GMT -6
oh nice. maybe i could race that sometime since i wanna build a car just like that. could someone tell me all about the divisions in the pinewood derby? i'm a noob.
|
|
joshm
Graphite
pinewoodracer365
Posts: 20
|
Post by joshm on Mar 6, 2009 23:36:22 GMT -6
set your avatar width at 100 and height at 82 in the profile modification area you can use this one for your signature area!! in signature area you want to type or cut/paste this code below for the image to show up [center][img src="http://i90.photobucket.com/albums/k246/MoodSwingProductions/Forum/racingacesig.jpg"][/center]i hope this is helpful for you! can you take the racing ace out of both of them? cuz i want it to be my sig and everything but if i were to build a car like it name it i wouldn't name it racing ace. it's not my car it's ace montana's from the move down and derby.
|
|