Post by PWDRacing on Jan 5, 2009 12:52:06 GMT -6
Extreme Pro-Modified Division Rules
1. Car Specs:
A. Width - not to exceed 2 3/4 inches
B. Length - not to exceed 7 inches
C. Weight - not to exceed 5.0 ounces on a scale accurate to 1/10
D. Center rail width clearance - no less than 1 3/4 inches.
E. Bottom clearance - no less than 3/8 inches from track. Fender flairs with less clearance are acceptable as long as the center rail width clearance is the same in rule D.
F. Height - not to exceed 2 3/4 inches
G. Wheelbase - no wheelbase restrictions
2. No part of the car body, wheels or attachments may protrude in front of the starting peg.
3. The following items are PROHIBITED:
A. Springs
B. Starting devices or propellants
C. Electronic or lighting devices that interfere with the race electronics.
D. Liquids, wet paint, oil, sticky substance, or powders of any kind (other than axle lubrication)
E. Glass or excessively fragile parts
F. Loose objects on car
G. Magnets
H. No part of any car, or attachment to any car, that is metal, pointed, sharp, and/or jagged may be capable of contacting any part of the track.
WHEELS:
4. Wheels for the Extreme Pro-Modified Division must conform to the following specifications:
A. Wheels must not be made of any material that can/could cause damage to the track (ie: metal)
AXLES:
5. Axles must not be connected to any device that mechanically alters rotation and spin.
6. Over-application of lubricant which results in excessive shedding onto the track is not allowed. Approved lubricants include (but are not limited to) graphite, Teflon, Nyloil, and Krytox.
7. Cars may be reclassified or disqualified if they are determined by the race officials to not meet these requirements.
1. Car Specs:
A. Width - not to exceed 2 3/4 inches
B. Length - not to exceed 7 inches
C. Weight - not to exceed 5.0 ounces on a scale accurate to 1/10
D. Center rail width clearance - no less than 1 3/4 inches.
E. Bottom clearance - no less than 3/8 inches from track. Fender flairs with less clearance are acceptable as long as the center rail width clearance is the same in rule D.
F. Height - not to exceed 2 3/4 inches
G. Wheelbase - no wheelbase restrictions
2. No part of the car body, wheels or attachments may protrude in front of the starting peg.
3. The following items are PROHIBITED:
A. Springs
B. Starting devices or propellants
C. Electronic or lighting devices that interfere with the race electronics.
D. Liquids, wet paint, oil, sticky substance, or powders of any kind (other than axle lubrication)
E. Glass or excessively fragile parts
F. Loose objects on car
G. Magnets
H. No part of any car, or attachment to any car, that is metal, pointed, sharp, and/or jagged may be capable of contacting any part of the track.
WHEELS:
4. Wheels for the Extreme Pro-Modified Division must conform to the following specifications:
A. Wheels must not be made of any material that can/could cause damage to the track (ie: metal)
AXLES:
5. Axles must not be connected to any device that mechanically alters rotation and spin.
6. Over-application of lubricant which results in excessive shedding onto the track is not allowed. Approved lubricants include (but are not limited to) graphite, Teflon, Nyloil, and Krytox.
7. Cars may be reclassified or disqualified if they are determined by the race officials to not meet these requirements.